Schoeps V4 U USM Set | Studio Vocal Mic with elastic suspension
2.599€
- Small diaphragm condenser with elastic suspension
- Capsule head with adjustable tilt angle
- Optimal 0° frequency response with slight treble boost
- Studio vocal microphone
The V4 U is the studio vocal microphone from Schoeps. It combines the outstanding technical features typical of Schoeps with a timeless, classic design. The appearance of the V4 U is based on the Schoeps microphone CM 51/3 from 1951, but it is a modern cardioid microphone: capsule, electronics as well as the mechanics are the result of an elaborate new development.
The capsule has an integrated 33 mm annular disc, which ensures that gradual bundling is achieved at high frequencies, similar to a large-diaphragm microphone. At the same time, the advantages of a small-diaphragm capsule are retained. Frequency response and polar diagram are exceptionally smooth. In addition, the internal capsule suspension attenuates structure-borne noise such as handling noise.
The internal electronics consist of a newly developed circuit design with a bridge output stage that is free of output capacitors and iron. As a result, the microphone has a low, particularly frequency-independent output impedance as well as especially high unbalance attenuation. It features high immunity to interference due to gapless shielding and has a modern EMC filter with very good characteristics in the output. The maximum sound pressure level is 144 dB SPL, which corresponds to an output level of 4.8 V.
No. 191102 Special colors: on request
Scope of delivery: V4 U, USM suspension, Premium Case
- Polar pattern: cardioid
- Frequency response: 50 Hz – 22 kHz
- Sensitivity: -36 dB (V/Pa), 16 mV/Pa
- Equivalent noise level (A-weighted): 15 dB
- Equivalent noise level (CCIR): 25 dB
- Noise level separation (A-weighted): 79 dB
- Limiting sound pressure level (THD < 0.5%): 144 dB SPL
- Max. Output voltage: 4.8 V (5 dbV) at 1 kΩ load
- Low Cut: 40 Hz, 18 dB/oct.
- Lowest recommended load impedance: 1 kΩ
- Output impedance: 50 Ω
- Maximum cable length: > 300 m
- Current consumption: 3.3 mA
- Common mode rejection ratio (CMRR) (at 1 kHz): > 80 dB
- Output: XLR-3M
- Length: 194mm
- Diameter: 34mm
- Width capsule head: 45mm
- Weight: 302g
- Finish: blue, gray
Color | Blue, Grey |
---|---|
Tube | No |
Mic Converter | Condenser microphone (FET) |
+48 Volt phantom power | Yes |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- Pro-Shield pop protection
- acoustically transparent metal grille
- with robust 9mm gooseneck
- Dynamic microphone
- Supercardioid
- for vocals, guitar amps and drums
- Drum Microphone Set
- Condenser & Dynamic Microphones
- Polar pattern: cardioid, hypercardioid
- 20Hz – 16kHz
- FET condenser microphone
- Heiserman HZ capsule
- Cinemag transformer
- NOS FETs
- FET condenser microphone, large diaphragm
- Polar pattern: cardioid
- 35Hz – 20kHz (+/-3.5dB)
- -10dB pad switch, 80Hz low cut switch
Reviews
There are no reviews yet