Digital Audio by meter

Digital Audio Meterware is designed for the loss-free transmission of digital audio signals such as S/PDIF, AES/EBU or ADAT. These cables guarantee a stable and interference-free connection, which is crucial for professional audio applications. With the ability to cut lengths as required, Digital Audio Meterware offers excellent signal quality and flexibility for different digital formats.

Filters
  • Filters
  • Sort by
    ...
What is digital audio cable by meter?

Digital audio cables sold by meter are unassembled cables that have been specially developed for the transmission of digital audio signals. These cables are crucial to ensure loss-free and interference-free transmission of digital audio data between devices such as DACs (digital-to-analog converters), audio interfaces, loudspeakers and CD players . In contrast to analog cables, digital cables must be particularly precise in their design in order to avoid signal distortion and data loss.

There are several types of digital audio cables by meter, which differ depending on the application and the signals to be transmitted:

  • Coaxial cables: These have an impedance of 75 ohms and are often used for S/PDIF connections. They are suitable for transmitting digital audio signals over relatively short distances.
  • Optical cables (TOSLINK): These use light waves for transmission and are insensitive to electromagnetic interference. They are ideal for interference-free transmissions, especially in environments with high electromagnetic pollution.
  • AES/EBU cables: These have an impedance of 110 ohms and are used for professional applications, such as the connection between digital mixing consoles and audio interfaces.

Digital audio cable by meter offers several advantages:

  • Flexibility: You can adjust the length of the cable exactly to your requirements, which is particularly advantageous in customized installations.
  • Cost savings: yard goods can be more cost-effective than pre-assembled cables, especially when cabling long distances or multiple devices.

Special care must be taken when cutting digital audio cables by meter to avoid damaging the sensitive conductors and shielding. Use a sharp tool to cut the cable precisely. After cutting, the cable ends should be carefully stripped and terminated with suitable connectors such as RCA plugs(for coaxial cables) or XLR plugs(for AES/EBU cables). For optical cables, it is important that the ends are absolutely clean and undamaged to ensure clear signal transmission.

A good digital audio cable by meter should have the following properties:

  • Low tolerance: A precise impedance (e.g. 75 Ohm for S/PDIF or 110 Ohm for AES/EBU) is crucial for the correct transmission of digital signals and the avoidance of signal reflections and data errors.
  • High-quality conductors: Use oxygen-free copper (OFC) for optimum conductivity and minimal signal loss.
  • Effective shielding: Good shielding (e.g. braid or foil shielding) is important to minimize electromagnetic interference (EMI) that could affect signal quality.
  • Robust insulation: The insulation should be durable and resistant to mechanical stress, but at the same time flexible enough to allow easy installation.

The length of your digital audio cable should be as short as possible to minimize signal loss. For coaxial cables, lengths of up to 10 meters are usually unproblematic, while optical cables can be used up to 5-10 meters depending on their quality. For AES/EBU connections, lengths of up to 100 meters can be achieved without noticeably affecting the signal quality, provided that the cables are of high quality.

Um Digital Audio Kabel Meterware richtig zu konfektionieren, folge diesen Schritten:

  1. Cut to length: Cut the cable to the required length, always allowing some extra length for connections and installations.
  2. Pull off the insulation: Carefully remove the outer insulation to expose the conductors. Make sure that you do not damage the shielding or the inner conductors.
  3. Attach connectors: Solder or crimp the appropriate plugs, such as BNC plugs for MADI, XLR plugs for AES/EBU or RCA plugs for S/PDIF, to the cable ends. Make sure that the shielding is correctly connected to the plug to avoid interference.
  4. Signal check: Test the cable for proper function after assembly to ensure that the digital signal is transmitted correctly and without errors.

Although some digital audio cables could theoretically also be used for analog signals, this is not ideal. The specific requirements for digital and analog signals are different, especially in terms of impedance and shielding. It is advisable to use the specified cable for each application to ensure the best signal quality.

The main difference between digital audio cables and conventional analog audio cables lies in the specific impedance and the type of signal transmission. Digital signals require more precise impedance control (e.g. 75 Ohm for coaxial cables) and higher shielding to prevent data loss and signal interference. Analog cables, on the other hand, are less sensitive to small impedance deviations, but have different requirements in terms of capacitance and resistance.

Die Verwendung von hochwertiger Digital Audio Kabel Meterware bietet mehrere entscheidende Vorteile:

  • Reliable signal transmission: High-quality cables with precise impedance and good shielding ensure interference-free and reliable transmission of digital audio signals, which is particularly important in professional audio applications.
  • Durability: Quality cables are more resistant to mechanical stress and environmental influences, which extends their service life and reduces the need for frequent replacements.
  • Adaptability: You can adapt the cables exactly to your needs, both in terms of length and the connectors and materials used.

When selecting digital audio cables by the meter, you should consider the following factors:

  • Area of application: Think about the environment in which you will be using the cable (e.g. studio, home theater, live setup) and what requirements it must meet.
  • Material quality: Look for high-quality conductors, precise impedance and robust insulation to ensure optimum signal transmission and a long service life.
  • Shielding: Choose a cable with sufficient shielding to minimize interference, especially in environments with a lot of electromagnetic noise.
  • Cable thickness and flexibility: Consider the thickness and flexibility of the cable to ensure that it is easy to handle for the planned installation.
Filters
My Cart
Wishlist
Recently Viewed
Categories
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • pa_abmessungen
  • Amp Class
  • No. of analogue outputs
  • No. of analogue inputs
  • Propagation speed
  • Degree of bending
  • Capsule
  • Channels
  • Color
  • Compressor Type
  • pa_conductor-resistance
  • Connections
  • Connector brand
  • Connector type
  • Conversion
  • pa_daempfung-bei-100-mhz
  • pa_daempfung-bei-500-mhz
  • pa_dauerbelastung
  • pa_durchmesser-isolierung
  • pa_durchmesser-leiter
  • Input impedance
  • EQ Type
  • Farad Core to Core
  • Farad Core to Screen
  • Format
  • Frequency bands
  • Overall diameter
  • Height in cm
  • Impedance
  • Insulation
  • Jacket
  • Headphone output
  • pa_leiterquerschnitt
  • Length
  • Max. Sampling rate
  • max. Bitrate
  • Max. cable diameter
  • Max. power
  • Microphone version
  • Number of microphones (sets)
  • min. cable diameter
  • Module Position
  • Module height increase
  • Module size
  • Multicore
  • Patch modes
  • Phantom power
  • No. of poles
  • pa_preamp
  • Room acoustic adjustment
  • pa_resistance-insulation
  • Polar pattern
  • RMS Power
  • Tube Socket
  • Tube-Type
  • pa_side-chain
  • Signal Level
  • Modification
  • Mating cycles
  • System
  • Transformer
  • Transmission protocols
  • Tube
  • Rack Units (RU)
  • Gold-plated / silver-plated
  • Version
  • Transducer principle
  • Angled
Compare