Happy Easter! Special Deals + Extra % only 1 day left. Shop now! 🐣

Instrument Cables by meter

Instrument cables by meter are specially designed for connecting musical instruments such as guitars, basses and keyboards to amplifiers or effects units. These cables offer excellent signal transmission and minimize unwanted background noise. The yard goods make it possible to assemble individual lengths that are precisely tailored to the requirements on stage and in the studio. Robust materials and high-quality shielding guarantee a long service life and reliable performance.
Translated with DeepL.com (free version)

Filters
  • Filters
  • Sort by
    ...
What is instrument cable by meter?

Instrument cables sold by meter refer to unassembled cables specifically designed for use with musical instruments such as guitars, basses, keyboards and other electric instruments. These cables are sold in meters and reels and can be cut to the desired length. They come without pre-installed connectors, which allows you to cut the cable to the desired length and fit it with the desired connectors.

Metered instrument cables offer several advantages, especially for musicians and sound engineers who need customized solutions:

  • Flexibility: You can adjust the exact length of the cable to optimize your setup and avoid cable clutter.
  • Cost savings: cables sold by meter are often cheaper than pre-assembled cables, especially if you need several cables or special lengths are required.

Precision is crucial when cutting instrument cable by meter. Use a sharp cable knife or a side cutter to cut the cable cleanly. Take care not to damage the shielding or the inner conductor. After cutting, you should assemble the ends with high-quality connectors to ensure a stable and durable connection.

The length of your instrument cable should be as short as possible to minimize signal loss and noise. For most applications, cables between 3 and 6 meters are sufficient. For longer cables, you should make sure that the cable is well shielded to avoid interference.

A good instrument cable sold by meter should have the following properties:

  • High-quality conductors: Use oxygen-free copper (OFC) for optimum signal transmission and minimal losses.
  • Robust insulation: Make sure the insulation is hard-wearing to protect the cable from mechanical damage while remaining flexible.
  • Effective shielding: Good shielding (e.g. braided shielding or foil shielding) is essential to reduce electromagnetic interference (EMI) and hum.
  • Low capacitance: A low capacitance cable minimizes signal loss and preserves the clarity and tone of your instrument.

The best instrument cables are made of oxygen-free copper (OFC) for the conductor, as this material offers excellent signal transmission. Braided copper or aluminum is often used for the shielding to reduce electromagnetic interference (EMI) and radio frequency interference (RFI). The outer jacket should be made of robust, flexible material such as PVC or rubber to protect the cable from wear and tear.

High-quality instrument cables by meter are characterized by thick shielding, a clean inner conductor made of oxygen-free copper and a robust outer sheath. Pay attention to the weight and flexibility of the cable – a heavy yet flexible cable is often a sign of good quality.

The use of high-quality instrument cables by meter offers several advantages :

  • Improved sound quality: The use of high-quality materials optimizes signal transmission, resulting in a clearer and more authentic sound.
  • Durability: High-quality cables are more resistant to wear and mechanical stress, which extends their service life.
  • Adaptability: You can tailor the cable to your exact needs, both in terms of length and the connectors and materials used.

You should consider the following factors when selecting instrument cables by meter:

  • Area of application: Think about the environment in which you will be using the cable (e.g. studio, stage, rehearsal room) and what requirements it must fulfill.
  • Material quality: Look for high-quality conductors and robust insulation to ensure a long service life and optimum signal transmission.
  • Shielding: Choose a cable with sufficient shielding to minimize interference, especially if you are working in environments with a lot of electromagnetic noise.
  • Capacitance: A low capacitance cable is particularly important to minimize signal loss and preserve the full frequency range of your instrument.

Follow these steps to correctly assemble instrument cables by meter:

  1. Cut to length: Cut the cable to the required length, always allowing some extra length for connections.
  2. Remove the insulation: Carefully remove the outer insulation and the shielding without damaging the inner conductor.
  3. Attach the plugs: Solder or crimp the appropriate plugs to the cable ends.
    Popular plug types for instrument cables are jack plugs (6.35 mm).
  4. Signal check: Test the cable for proper function after assembly to ensure that there are no signal interruptions or humming.

Yes, you can also use metered instrument cables for other audio applications such as patch cables in studios, live setups or for use in effects devices. However, make sure that the cable is suitable for the specific requirements of the application.

Filters
My Cart
Wishlist
Recently Viewed
Categories
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Weight
  • Dimensions
  • pa_abmessungen
  • Amp Class
  • No. of analogue outputs
  • No. of analogue inputs
  • Propagation speed
  • Degree of bending
  • Capsule
  • Channels
  • Color
  • Compressor Type
  • pa_conductor-resistance
  • Connections
  • Connector brand
  • Connector type
  • Conversion
  • pa_daempfung-bei-100-mhz
  • pa_daempfung-bei-500-mhz
  • pa_dauerbelastung
  • pa_durchmesser-isolierung
  • pa_durchmesser-leiter
  • Input impedance
  • EQ Type
  • Farad Core to Core
  • Farad Core to Screen
  • Format
  • Frequency bands
  • Overall diameter
  • Height in cm
  • Impedance
  • Insulation
  • Jacket
  • Headphone output
  • pa_leiterquerschnitt
  • Length
  • Max. Sampling rate
  • max. Bitrate
  • Max. cable diameter
  • Max. power
  • Microphone version
  • Number of microphones (sets)
  • min. cable diameter
  • Module Position
  • Module height increase
  • Module size
  • Multicore
  • Patch modes
  • Phantom power
  • No. of poles
  • pa_preamp
  • Raumanpassung
  • pa_resistance-insulation
  • Polar pattern
  • RMS Power
  • Tube Socket
  • Tube-Type
  • pa_side-chain
  • Signal Level
  • Modification
  • Mating cycles
  • System
  • Transformer
  • Transmission protocols
  • Tube
  • Rack Units (RU)
  • Gold-plated / silver-plated
  • Version
  • Transducer principle
  • Angled
Compare