Gyraf Audio G21 | Multiband Clipper
5.349€
- Multiband Clipper
- 3 bands
- Global Clipper (white, pink, red)
- 2 HPF frequencies with 18dB/Oct.
The G21 is a further development of parallel-passive G14 equation system. The parallel topology allows multiband control without the traditional problems, such as phase problem in recombination. Since the bands are not split, but all frequencies are treated in parallel, the spike/peak phase is changed first, and then actually clipped if the overall signal does not fall below the threshold by changing the phase.
Note: The G21 is supplied as standard with a mains voltage of 230V – If 115V is required, please specify when ordering.
- Preferred on 2Bus for mixing and mastering
- Multiband Clipper with 3 bands
- + Parent clipper (white, pink, red)
- Relay bypass
- Format: 19″ / 4 U
- Designed and handmade in Denmark
Multiband Clipper
In addition to the three overload bands, there is an overall overload control that can be set to “white” (linear), “pink” (-3dB/oct.) or “red” (-5dB/oct.), allowing a gradual lowering of the threshold at higher frequencies.
Essentially, the passive design maintains complete control and predictability in the clipping process, strengthening signal integrity as much as possible.
The band “bypass” switches are relay controlled, as is the global “bypass,” completely bypassing the unit. In addition, the G21 offers high-pass filtering optionally at 25 or 35 Hz with a slope of 18dB/oct.
Weight | 8 kg |
---|---|
Tube | No, Yes |
Channels | Stereo |
Einheiten (HE) | 4 |
Port | XLR |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- High voltage pentode & triode tube stages
- Parallel saturation with mix control
- 3-way “tilt” frequency control via parallel saturation
- Mastering M/S Processor
- Balance and Trim for Mid signal
- Elliptical filter and stereo width for side signal
- 120V technology
- Optocoupler as control element
- Frequency range: 5 – 60000 Hz
- Channels linkable for stereo operation
- All-tube technology
- “Push Pull” PreAmp
- selectable microphone impedance: 600 / 1200 / 2400 Ohm
TEST UNIT AVAILABLE
Reviews
There are no reviews yet