Avantone CK-1 – Small-Capsule FET Pencil Mic
179€
- FET condenser microphone
- Polar pattern: omnidirectional, cardioid, hypercardioid
- 25Hz – 20kHz (+/-3dB)
- -10dB pad switch, 80Hz low cut switch
The Avantone “Cabernet (C Series)” microphones are designed to provide professional performance. They meet or exceed the specifications of much more expensive microphones. The CK-1 in its normal stock form uses high quality polystyrene and metallized polypropylene capacitors in the audio path. On stage for drum overheads, as well as for acoustic instruments and piano, the microphone is equally at home.
- Transducer principle: condenser microphone (FET)
- Capsule: 3 interchangeable 19mm capsules
- Polar pattern: omnidirectional, cardioid, hypercardioid
FET Small diaphragm
CONDENSER MICROPHONE
The CK-1’s rugged microphone body and capsule are precision machined from brass. Aesthetically, it is finished in an elegant Cabernet Wine Red accented by polished nickel parts and capsule placement.
The CK-1 features 3 interchangeable 19mm (3/4″) capsules for unlimited miking possibilities. The microphone is made from the finest materials and accordingly has excellent signal integrity.
The included SSM Shockmount allows for precise positioning of the microphone while preventing unwanted vibrations from being transmitted into the microphone. The CK-1 features separate switches for a -10dB attenuation and an 80Hz high-pass filter. The -10dB attenuation switch can be activated when miking sources with very high sound pressure levels to prevent overloading the electronics. The 80Hz high-pass filter prevents unwanted low frequencies in the recording.
- Phantom power: Yes, +48V
- Frequency response (+/-3dB): 25Hz – 20kHz
- Impedance: <=200Ω
- Max. SPL: 138dB (0.5% THD @1kHz)
- Inherent noise: <17dBa
- Signal to noise ratio: 78dB
- Sensitivity: 15mv/pa
- low cut switch (6dB/oct.): 80Hz
- Pad switch: -10dB
- Connector: 3-pin XLR male
Weight | 1,3 kg |
---|---|
Dimensions | 17,8 × 22,9 × 10,2 cm |
Mic Converter | Condenser microphone (FET) |
Directional characteristic | Cardioid, Hyper-Cardioid, Omnidirectional |
Impedance | 200Ω |
+48 Volt phantom power | Yes |
Port | XLR |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- FET condenser microphone, large diaphragm
- polar pattern: cardioid, omnidirectional, figure-of-eight
- 20Hz – 20kHz (+/-3dB)
- -10dB pad switch, 80Hz low cut switch
- FET condenser microphone
- Heiserman HZ capsule
- Cinemag transformer
- NOS FETs
- Pro-Shield pop protection
- acoustically transparent metal grille
- with robust 9mm gooseneck
- Tube microphone with BLA circuitry
- 9 Polar Patterns available (Circle, Cardioid, Eight)
- 20Hz – 20kHz (+/-3dB)
- -10dB pad switch, 80Hz low cut switch
- Small diaphragm condenser microphone
- Cardioid
- -10dB pad
- for tom drums
Reviews
There are no reviews yet