English
Deutsch
Monitor Controller
Sonarworks SoundID Reference for Multichannel + measurement microphone
Original price was: 519€.359€Current price is: 359€.
Brand: Sonarworks
🚚
available immediately
💰
Get 301 Gear Coins
- Speaker calibration from stereo to 9.1.6
- Headphone calibration profiles for more than 480 supported models
- Translation check: simulation of over 20 different devices and device types
Sonarworks SoundID Reference is a loudspeaker and headphone calibration software that delivers a consistently accurate studio reference sound.
Studio loudspeakers can be calibrated in less than 20 minutes using a SoundID Reference measurement microphone.
Headphones can be calibrated with more than 480 supplied headphone profiles.
With the corresponding calibration profile, the software adjusts the frequency response so that it is completely flat across all audible frequencies.
You can also create user-defined target curves and make your own adjustments to the target curve in real time.
The precise studio reference sound can be seamlessly switched between different speakers, headphones and rooms.
- Speaker calibration from stereo to 9.1.6
- Headphone calibration profiles for more than 480 supported models
- User-defined target: adjustment of the target curve in real time
- Translation check: simulation of over 20 different devices and device types
- 3 filter modes: Zero Latency, Mixed and Linear Phase
- Additional DSP processing controls: Mono, Dry/Wet and Safe Headroom
- MIDI assignment in the SoundID Reference app for various control elements
- User presets in the SoundID Reference app for quick switching between predefined output device/channel pair combinations
Scope of delivery
- SoundID Reference stand-alone + DAW plug-in (AU, VST, AAX)
- SoundID Reference measurement microphone (XLR connection) + individual calibration profile
- License can be activated on up to 3 devices simultaneously
Microphone specifications
- Capsule: pre-polarized electret condenser capsule
- Directional characteristic: omnidirectional
- Frequency response: 20 Hz – 20 kHz with a supplied calibration profile
- Sensitivity: -37 dB/Pa (14 mV)
- Intrinsic noise: 24 dB
- Signal-to-noise ratio: 70 dB
- Dynamic range: 106 dB
- Maximum sound pressure level: 132 dB
Prerequisites
- Mac: macOS 10.12 or higher
- PC: Windows 8 (64-bit) or higher
- 2.0 to 9.1.6 loudspeaker system or
- Supported headphones or headphones individually calibrated by Sonarworks
- Audio interface with +48 V phantom power and 44.1 kHz sampling rate
- XLR audio cable
Supported hardware for calibration profile
MERGING Technologies MERGING+ANUBIS (export of headphone and stereo/multichannel loudspeaker profiles)
- AVID MTRX with SPQ DSP (export of multi-channel speaker profiles)
- AVID MTRX Studio (export of multi-channel speaker profiles)
- DAD AX32 with SPQ DSP (export of multi-channel speaker profiles)
- Dolby Atmos Renderer Mastering Suite (export of multi-channel speaker profiles)
- Wayne Jones AUDIO Studio Monitors (export of stereo/multi-channel speaker profiles)
- ADAM Audio A-Series (export of stereo/multi-channel speaker profiles)
- Fluid Audio Image series (export of stereo/multi-channel speaker profiles).
NOTE: The Image series speakers will not be available on the market until mid-December.
| Version | Multichannel + Mic |
|---|---|
| Manufacturer | Sonarworks |
Product safety
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Sonarworks SoundID Reference for Multichannel + measurement microphone
Your question
* Question is required
Name
* Name is required
Email
* Email is required
* Please tick the checkbox to proceed
There are no questions yet
Related Products
Neutrik rear twist NBNC75BJP9 | HD-SDI BNC connector
Add to cart
-13%Limited
Original price was: 3,90€.3,40€Current price is: 3,40€.
- 75 Ohm rearTWIST BNC connector
- suitable for Belden 1505F
- suitable for HD applications
Slate Digital ML-1 | Modeling Microphone
Add to cart
Promo Deal-48%Limited
Original price was: 649€.339€Current price is: 339€.
- Neutral condenser microphone with modeling function
- incl. Classic Tubes & Virtual Preamp Collection
- Modeling software can completely change the sound characteristics, even after recording
- Virtual selection of classic vintage microphones and preamp models
Van Damme Digitour Series AES/EBU DMX Multicore 4 Pair XLR 3m (B-Stock, New)
Add to cart
DEAL-20%Limited
Original price was: 112€.90€Current price is: 90€.
- Analog Audio (Line, Mic)
- AES/EBU, RS485, RS422, DMX512
- Neutrik XLR with gold-plated contacts
- 4x XLR male to 4x XLR female with 1m tails
Golden Age Audio Premier GA ELA M 251E | Tube microphone
Add to cart
-10%Limited
Original price was: 5.890€.5.290€Current price is: 5.290€.
- Large diaphragm tube microphone
- Cardioid, omnidirectional or figure-of-eight polar pattern
- Max. 136dB SPL
- K251D capsule + EH6072A tube
Sonible smart:limit | Smart Limiter Plug-In
Add to cart
-47%Limited
Original price was: 125€.66€Current price is: 66€.
- Optional A.I.-based limiter with automatic parameterization
- Comprehensive loudness monitoring
- Loudness and dynamic optimization for streaming services
Reviews
There are no reviews yet