SPL Audio Transient Designer 4
1.019€
- Transient Designer
- with Differential Envelope Technology
- in 19″ format
The Transient Designer has created a new genre of dynamic processors that can be used to shape the attack and decay of any audio signal.
Level-independent processing of dynamic signal characteristics is no problem thanks to SPL’s proprietary Differential Envelope Technology (DET). This technology uses the incoming signal to create a differential envelope. In doing so, the envelope follower aligns itself with the natural signal progression and achieves the optimal result for each moment.
Inputs and outputs (balanced):
- Max. Input and output level: 22dBu
- Input impedance: 22kΩ
- Max. Output level: 22.4dBu
- Output impedance: 100Ω
- Common mode rejection (1kHz): 80dB
- Frequency response (-3dB): 10Hz – 100kHz
- THD & N (0dBu, 10Hz – 22kHz): 0.004%.
- Crosstalk (1kHz): -90dB
- Noise (A-weighted): -105dBu
- Dynamic range: 127.4dB
Transient Designer
The module offers four channels (Neutrik XLR connectors, nominal level +6dB), each with two controls for sound processing of signals:
The Attack control can be used to raise or lower the transient phase by up to 15dB. A positive attack increases the amplitude, while a negative attack reduces the amplitude in the transient phase.
To lengthen or shorten the decay phase of a signal, the signal can be changed by 24dB. A positive sustain lengthens the decay, while a negative sustain shortens the signal.
For processing stereo signals, channels 1+2 and 3+4 can be linked. The left channel becomes the master in each case.
Attack ... that's how it's done:
Sustain ... that's how it's done:
Weight | 5 kg |
---|---|
Dimensions | 54 × 38 × 12 cm |
Color | Black |
Channels | Mono, Stereo |
Port | XLR |
Format | 19inch |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- High voltage pentode & triode tube stages
- Parallel saturation with mix control
- 3-way “tilt” frequency control via parallel saturation
- Multiband-Optokompressor
- komplett in Röhrentechnik
- 3 X-Over-Frequenzen
- sehr linearer Frequenzgang
- All-tube technology
- “Push Pull” PreAmp
- selectable microphone impedance: 600 / 1200 / 2400 Ohm
TEST UNIT AVAILABLE
passive mastering EQ
3 filter bands per side
LF + MF semi-parametric, HF parametric
120V technology
- Optocoupler as control element
- Frequency range: 5 – 60000 Hz
- Channels linkable for stereo operation
Reviews
There are no reviews yet