Schoeps MiniCMIT Chroma Green | Miniature shotgun microphone
incl. VAT
2.199€

- Same features of the CMIT 5 in a compact design
- P12 as well as P48 can be used for power supply
- Low power consumption
- Fixed low cut, 4th order at 70 Hz
The CMIT 5 defined a new standard in shotgun microphones right from the start. Its bundling increases particularly evenly with frequency, resulting in an unusually balanced sound character. Furthermore, the level decreases laterally from the 0° axis particularly smoothly and independent of frequency. As a result, localized events can also be recorded here in a sound-neutral manner, and small errors in angling are forgiven. The CMIT 5 bundles more than you would expect from a microphone of its length. It is also used for music recordings, e.g. in opera, when a stronger directivity is required (e.g. in case of spatial confinement).
The MiniCMIT tube directional microphone offers the features of a CMIT 5 in a compact design. The frequency responses of MiniCMIT, CMIT 5 and SuperCMIT (ch2) are identical. MiniCMIT and CMIT 5 also have similar analog electronics, so the microphones can be interchanged without changing the sound.
For these reasons, the MiniCMIT is recommended for use with digital transmitters such as the Sound Devices A20-TX:
- The MiniCMIT can be powered with P12, which is more power efficient.
- The MiniCMIT features the latest version of the Schoeps RFI Shield, which has been developed and tested specifically for this type of application.
No. 191102 Special colors: Special colors are available in the configurator available
No. 191201 Engraving: individual engraving in the configurator possible
- Polar pattern: supercardioid/ lobe
- Frequency range: 60 Hz – 20 kHz
- Sensitivity: -35 dB (V/Pa), 17 mV/Pa
- Substitute noise level (A-weighted): 14 dB
- Replacement noise level (CCIR): 24 dB
- Noise level distance (A-weighted): 80 dB
- Maximum sound pressure level (THD < 0.5%): 130 dB SPL (P48); 115 dB SPL (P12)
- Max. Output voltage: 1 V (0 dbV) at 2 kΩ load
- Low Cut: fixed 70 Hz, 24 dB/oct.
- Lowest recommended load impedance: 2 kΩ
- Output impedance: 100 Ω
- Maximum cable length: > 100 m
- RFI Shield: Yes
- Current consumption: 23 mA (P48)
- Common mode rejection outputs (CMRR) (at 1kHz): > 55 dB
- Output: XLR-3M
- Length: 151mm
- Diameter: 21mm
- Weight: 78g
- Surface: chroma green
Scope of delivery: MiniCMIT, W 140 windscreen, SG 20 clamp

The MiniCMIT tube directional microphone offers the features of a CMIT 5 in a compact design. The frequency responses of MiniCMIT, CMIT 5 and SuperCMIT are identical. MiniCMIT and CMIT 5 also have similar analog electronics, so the microphones can be interchanged without changing the sound.
For these reasons, the MiniCMIT is recommended for use with digital transmitters such as the Audio Ltd. A10-TX:
- The MiniCMIT can be powered with P12, which is more power efficient.
- The MiniCMIT features the latest version of the Schoeps RFI Shield, which has been developed and tested specifically for this type of application.



Shooting in West Africa: “The MiniCMIT worked very reliably even in high humidity. Here is a photo from (the very humid) Elmina/ Ghana.”
Jule Buerjes, freelance sound woman
Manufacturer | Schoeps |
---|---|
Color | Chroma Green |
Converter principle | Condenser microphone (FET) |
Phantom Power | Yes |
Tube | No |
Highpass | Yes |
Pad | No |
Characteristic switchable | No |
Directional characteristic | Supercardioid |
Product safety
Manufacturer information
SCHOEPS GMBH
Spitalstraße 20
76227 Karlsruhe (Durlach)
Germany
0721 943 20-0
Person responsible for the EU
Der Hersteller dieses Produkts befindet sich innerhalb der Europäischen Union und übernimmt die Rolle der verantwortlichen Person gemäß der EU-Produktsicherheitsverordnung. Für weitere Informationen wenden Sie sich bitte an den Hersteller.
Safety instructions
Our offer is primarily aimed at commercial users who test and use products on their own responsibility for their professional use. Please note that safety-relevant information, instructions and symbols may be contained in the supplied instructions for use. These are enclosed with the product and, if available, can also be downloaded in digital form from our website.
We recommend that you read the instructions for use carefully and check the product for safety and suitability for your intended use before use. If you require further information, please contact the manufacturer or the manufacturer's EU representative directly.
Only logged in customers who have purchased this product may leave a review.
Q & A

Related Products
- FET condenser microphone
- Heiserman HZ capsule
- Cinemag transformer
- NOS FETs
- Large diaphragm tube microphone (matched pair)
- Cardioid, omnidirectional, figure eight
- CK12 capsule + 6071A tube
- for voice and acoustic instruments
- Large diaphragm tube microphone
- Cardioid, omnidirectional
- M7 capsule + VF14K tube
- popular for vocals and acoustic instruments
- Large diaphragm tube microphone
- Cardioid, omnidirectional, figure eight
- CK12 capsule + 6071A tube
- for voice and acoustic instruments
- Hypercardioid capsule black
- for STC-1 and STC-1S
Reviews
There are no reviews yet