English
Deutsch
Monitor Controller
Schoeps CMC 1 SO | Microphone amplifier with gooseneck for A10
1,107.95$
- CMC 1 with gooseneck for Sound Devices A10
- constant frequency response
- Very low distortion
- for operation with 12 V or 48 V phantom power
- completely balanced signal routing, especially low impedance output
- safe against RF interference with “RFI Shield
The CMC 1 SO is identical to the CMC 1 U, but instead of a built-in XLR connector it has an attached gooseneck with a Lemo 3pin output connector and is suitable for the Sound Devices A10 bodypack transmitter. It can be used without any compromise instead of a CMC 6 with all components of the Colette system, including the MK capsules. It therefore offers uncompromising miniaturisation for applications in which the size of the microphone plays a role.
The electrical and tonal characteristics of the CMC 1 are in no way inferior to the CMC 6. On the contrary: thanks to sophisticated, modern electronic design, outstanding electrical properties have been achieved. This means that it can be driven at a particularly high level (135 dB-SPL with the MK 4) and still consumes very little power (2 mA at P48).
No. 191102 Special colors: Nickel, chrome green and other special colors are available in the configurator available in the configurator
No. 191201 Engraving: individual engraving in the configurator possible
Technical specifications
- Frequency range: 20 Hz – 20 kHz
- Maximum output voltage: 1.8 V (5 dBV) at 1 kΩ load
- Maximum sound pressure level (THD < 0.5 %):
- 135 dB-SPL (P48) with MK 4
- 131 dB-SPL (P12) with MK 4
- Low-cut filter: 20 Hz, 12 dB/octave
- Output impedance: 50 Ω ± 1 Ω (8 Hz – 50 kHz)
- Minimum recommended load impedance: 1 kΩ
- Common mode rejection (at 1 kHz): > 55 dB
- Maximum cable length: > 400 m / 1300 ft
- SCHOEPS RFI shielding: Yes
- Phantom power / voltage range:
- P48 / 30 V – 52 V
- P12 / 11 V – 13 V
- Power consumption:
- 2 mA (P48)
- 3 mA (P12)
- Output: Lemo, analog, 1 channel
- Dimensions:
- Length: 29 mm / ~1.1″
- Diameter: 20 mm / 0.8″
- Weight: ~28 g / 1 oz (without cable)
Scope of delivery: CMC 1 SO, SGC clamp, premium case
CMC Microphone amplifier
Microphone capsules of condenser microphones cannot be operated directly on microphone cables or inputs. This requires the interconnection of a microphone amplifier. Each MK capsule of the Colette series must therefore be screwed to a microphone amplifier and only together with it forms a complete microphone.
The CMC 1 SO can be operated with 12V and 48V phantom power. The CMC 1 SO circuit automatically recognizes the power supply and adjusts itself accordingly. Their properties remain essentially unchanged – only the current is adapted to the supply voltage. This is higher at 12V than at 48V. Nevertheless, the power consumption is lower at 12V, which is an advantage in battery operation
The CMC 1 is available in different versions:
CMC 1 U:
XLR output connector
CMC 1 L:
Output connector Lemo
CMC 1 K:
fixed cable XLR or Lemo
CMC 1 KV: fixed side cable XLR or Lemo
CMC 1 SO: permanently connected gooseneck and Lemo3pin output
| Color | Grey |
|---|---|
| Tube | No |
| Converter principle | Condenser microphone (FET) |
| Manufacturer | Schoeps |
| Phantom Power | Yes |
| Directional characteristic | Cardioid, Figure-Eight, Hyper-Cardioid, Omnidirectional, Open kidney, Supercardioid, Wide kidney |
| Characteristic switchable | No |
| Highpass | No |
| Pad | No |
Product safety
Manufacturer information
SCHOEPS GMBH
Spitalstraße 20
76227 Karlsruhe (Durlach)
Germany
0721 943 20-0
Person responsible for the EU
Der Hersteller dieses Produkts befindet sich innerhalb der Europäischen Union und übernimmt die Rolle der verantwortlichen Person gemäß der EU-Produktsicherheitsverordnung. Für weitere Informationen wenden Sie sich bitte an den Hersteller.
Safety instructions
Our offer is primarily aimed at commercial users who test and use products on their own responsibility for their professional use. Please note that safety-relevant information, instructions and symbols may be contained in the supplied instructions for use. These are enclosed with the product and, if available, can also be downloaded in digital form from our website.
We recommend that you read the instructions for use carefully and check the product for safety and suitability for your intended use before use. If you require further information, please contact the manufacturer or the manufacturer's EU representative directly.
Only logged in customers who have purchased this product may leave a review.
Q & A
Schoeps CMC 1 SO | Microphone amplifier with gooseneck for A10
Related Products
- FET condenser microphone
- Heiserman HZ capsule
- Cinemag transformer
- NOS FETs
- Large diaphragm tube microphone (matched pair)
- Cardioid, omnidirectional, figure eight
- CK12 capsule + 6071A tube
- for voice and acoustic instruments
- Large diaphragm tube microphone
- Cardioid, omnidirectional
- M7 capsule + VF14K tube
- popular for vocals and acoustic instruments
- Large diaphragm tube microphone
- Cardioid, omnidirectional, figure eight
- CK12 capsule + 6071A tube
- for voice and acoustic instruments
- Hypercardioid capsule black
- for STC-1 and STC-1S
Reviews
There are no reviews yet