Gyraf Audio G23-S | Stereo Tilting Equalizer
3.549€
- Linear tilt EQ
- Additional 3-band Baxandall EQ
- Dual technology: classic tube sound or modern solid state
- “Trim” and relay bypass
Der Gyraf Audio G23-S ist ein Tilt-EQ, welcher vor allem für das Mixing und Mastering gedacht ist. Er eignet sich für Situationen, in denen ein Mix bereits schon gut ausbalanciert ist, aber noch ein wenig dunkler oder heller werden soll, ohne dass die Gesamtdefinition darunter leidet. Die aktuelle Version -S wurde erweitert und enthält nun zwei völlig unterschiedliche Topologien für Makeup Gain und Interfacing.
Note: The G23-S is supplied as standard with a mains voltage of 230V – If 115V is required, please specify when ordering.
- Preferred on 2Bus for mixing and mastering
Linear Tilt EQ
additional 3 band Baxandall EQ with boost/cut + three frequencies per band
relay bypass
adjustable overall output level
switchable between tube and solid state topology circuitry
hand-selected tubes
tube amplification based on 6H23n (E88CC/6922) tubes
format: 19″ / 2 HE
Designed and handmade in Denmark
Equalizer with gentleness and subtlety
What sets the G23-S apart from all other tilt EQs is that it is equipped with a highly linear filter with a slope of 1 dB/oct, so turning the tilt control produces an almost 100% straight frequency response curve. Overall, this allows for some correction without sounding “rectified”.
In addition to the tilt EQ, the G23-S has a Baxandall EQ on board that can be used to edit highs, mids and lows. The highs can be processed with +/- 4dB, the mids with +/- 2dB and the lows with +/- 6.5dB. All three bands have three different frequencies to choose from.
The active technology of the G23-S is selected via the bypass switch:
The “IN” position of the bypass switch selects a tube amplifier stage based on 6H23n (E88CC/6922) tubes combined with a classic transformer balanced input and output circuit. The “S” position switches to a solid state circuit. When the bypass is activated to “OUT”, it takes all the electronic circuitry out of the audio path and connects the input XLRs directly to the output XLRs using a relay.
| Weight | 6 kg |
|---|---|
| EQ Type | Tilt |
| Frequency bands | 4 |
| Tube | No, Yes |
| Channels | Stereo |
| Einheiten (HE) | 2 |
| Port | XLR |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- All-tube technology
- “Push Pull” PreAmp
- selectable microphone impedance: 600 / 1200 / 2400 Ohm
TEST UNIT AVAILABLE
- Mastering Equalizer
- 5 fully parametric bands
- Constant & Proportional-Q
- 120V technology
passive mastering EQ
3 filter bands per side
LF + MF semi-parametric, HF parametric
120V technology
Mastering Console
8 stereo inputs
max. 4 stereo speakers, 1 mono speaker, 1 subwoofer
120V technology
- Mastering M/S Processor
- Balance and Trim for Mid signal
- Elliptical filter and stereo width for side signal
- 120V technology
Reviews
There are no reviews yet