Avantone CLA-200 – Class A/B Studio Power Amp – 200w
985€
- 2U Class AB amplifier
- 200W per channel/ 300W bridged
- convection cooled
The Avantone Pro CLA-200 Studio Reference Amplifier is a classically designed Class A/B amplifier. It was created in the traditional studio style with generous VU meters, high quality Japanese components and a serious toroidal transformer line power supply.
In a standard 2U rack enclosure, this amplifier can produce over 200 watts per channel on an 8-ohm load, making it perfect for medium to large speakers in a studio environment. The CLA200 is convection cooled – no fan noise – so it can be used in the same room as the monitors.
- Power: 200W per channel (8Ω) / 300W bridged (4Ω)
- Frequency range (+/-0.5dB): 20Hz – 20kHz
- Impedance: 20kΩ
- Amp Class: Class AB
- Distortion: 0.1% THD @1kHz
- Input sensitivity (1kHz): 0.775V (0dBu)
- Signal to noise ratio: <94dB
- SNR: >103dB
- Connector: 3-pin XLR male, speaker wire,
banana plug, speakON
CLA-200 Amplifier
The CLA-200 is designed to be used with the CLA-10 studio monitors, but can be used with almost any demanding loudspeaker load. Very low distortion, stable performance under difficult conditions, and an open and transparent sound make it a good choice for demanding studios.
The Avantone Pro CLA-200 Studio Reference Amplifier is an old-school, dynamic, high-resolution, full-range, high-output system.
Just as in the CLA-100, inputs are XLR jacks, while monitors can be connected via speaker wires, banana or speakON plugs.
Weight | 20 kg |
---|---|
Dimensions | 55,9 × 55,9 × 15,3 cm |
Channels | Bridged, Stereo |
Amp Class | AB |
Max. Power | 200W |
Impedance | 8Ω |
Eingangsimpedanz | 20kΩ |
Port | Banana plug, Speaker wire, speakON, XLR |
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related Products
- active 2-way monitor
- 18cm woofer + 3,5cm tweeter
- XLR and RCA connection
- Monitor Controller
- Stereo and Surround 7.1
- with headphone jack
- Source selection & speaker management
- Closed Studio & Live Headphone
- 16Ω
- 3m straight cable + 1m coiled cable
- 1/8″ TRS with 1/4″ adapter
- Monitor Controller
- with headphone jack
- Phonitor Matrix
- 32-bit AD/DA converter
- Crossover
- Replacement crossover for CLA-10, CLA-10A, KICK
- also suitable for original Yamaha NS-10
Reviews
There are no reviews yet