Schoeps stereo set CMC 6 U with MK 41 | condenser microphone with supercardioid capsule

- Stereo set with CMC 6 U + MK 41 capsule + accessories
- Supercardioid polar pattern
- constant frequency response
- Very low distortion
- safe against RF interference with “RFI Shield
2.436,12€
The CMC 6 is Schoep’s most popular microphone amplifier. Its signal routing is completely symmetrical. The electrical characteristics of the CMC 6 set standards in terms of low distortion and unbalanced attenuation.
Microphone capsules of condenser microphones cannot be operated directly on microphone cables or inputs. This requires the interconnection of a microphone amplifier. Each MK capsule of the Colette series must therefore be screwed to a microphone amplifier and only together with it forms a complete microphone.
The CMC 6 U can be operated with 12V and 48V phantom power. The CMC 6 U circuit automatically detects the power supply and adjusts itself accordingly. Their properties remain essentially unchanged – only the current is adapted to the supply voltage. This is higher at 12V than at 48V. Nevertheless, the power consumption is lower at 12V, which is advantageous for battery operation.
The CMC 6 U can be used in many setups (e.g. OSIX) that have a fixed alignment of the XLR connector and therefore of the amplifier. The alignment is also fixed in the compatible MS and double MS setups (e.g. Cyclone). This means that the microphone cannot be rotated as desired in such a suspension.With axially aligned capsules such as the MK 4, this does not matter, but a vertical capsule such as the MK 8 must be aligned radially.
This accessory helps in such cases:
No. 800540: O-ring for radial alignment of an MK capsule
This O-ring is placed on the thread of the amplifier and ensures that the MK capsule remains permanently stable in any orientation. The O-ring is supplied with the MK 8 and all other vertical capsules (MK 4V, 41V) and can also be ordered separately.
No. 191102 Special colors: Nickel, chrome green and other special colors are available in the configurator available in the configurator
No. 191201 Engraving: individual engraving in the configurator possible
The MK 41 offers excellent attenuation of diffuse sound, resulting in a dry, clear sound. It is characterized by exceptional frequency independence: Sound coming from the side or from behind is strongly attenuated but recorded without distortion. This characteristic makes the MK 41 an international standard for indoor recordings in the field of film sound.
Compared to other capsule types, the MK 41 is particularly insensitive to acoustic feedback as long as the loudspeaker does not radiate directly from behind. The supercardioid reaches its minimum sensitivity at an angle of incidence of around 125°.
Thanks to their frequency-independent directivity, even oblique and diffuse sound is transmitted without coloration and therefore naturally. This represents a clear advantage over directional tubes, whose directivity is often only significantly higher than that of the supercardioid at higher frequencies and whose sound depends on the direction of incidence.
The MK 41 is therefore an interesting alternative to a shotgun in many applications, even if its compact dimensions do not immediately suggest its high directivity. The MK 41 can also be moved closer to the sound source without the additional directing tube element.
Technical specifications microphone amplifier
- Frequency range: 20 Hz – 20 kHz
- Maximum output voltage: 1 V (0 dBV) at 1 kΩ load
- Maximum sound pressure level (THD < 0.5 %): 131 dB-SPL (P12/P48) with MK 4
- Low-cut filter: 20 Hz, 12 dB/octave
- Output impedance: 42 Ω
- Minimum recommended load impedance: 1 kΩ
- Common mode rejection (at 1 kHz): > 55 dB
- Maximum cable length: > 400 m (~1,300 ft)
- SCHOEPS RFI shielding: Yes
- Phantom power / voltage range:
- P48 / 20-52 V
- P12 / 10-13 V
- Power consumption:
- 4 mA (P48)
- 8 mA (P12)
- Output: XLR-3M, analog, 1 channel
- Dimensions:
- Length: 116 mm / ~4.5″
- Diameter: 20 mm / 0.8″
- Weight: 60 g / 2.1 oz
Technical specifications microphone capsule
- Directional characteristic: Supercardioid
- Frequency response: 40 Hz – 26 kHz
- Sensitivity: -36 dB (V/Pa), 16 mV/Pa
- Equivalent noise level (A-weighted): 14 dB
- Equivalent noise level (CCIR): 23 dB
- Noise level distance (A-weighted): 80 dB
- Maximum sound pressure level (THD < 0.5 %): 131 dB-SPL
- Dimensions:
- Length: 22 mm
- Diameter: 20 mm
- Weight: 17 g
Scope of delivery: CMC 6 U, MK 41 capsule, SG 20 clamp, B 5 D pop screen, Velcro cable ties, premium case
CMC Microphone amplifier
In addition to the standard version of the CMC 6 U, the following variants are available:
CMC 6 linear (No. 193002)
The CMC 6 microphone amplifier has a lower cut-off frequency of 20 Hz to minimize infrasonic interference of various origins, e.g. from air currents or vibrations. However, when using pressure receivers, there may be a desire to record frequencies below 20 Hz without attenuation. The CMC 6 linear allows this. On request, it can be supplied with a lower cut-off frequency of 10 Hz. Caution: As pressure receivers also pick up infrasound down to very low frequencies, even noise from ventilation systems or rail vehicles can be problematic in large rooms, e.g. churches. The danger is even greater with pressure gradient receivers. Although they only transmit the lowest frequencies from the sound field at a reduced level, they react all the more strongly to other unwanted stimuli such as air movement and structure-borne noise. Although these signals are outside the audible range, they can cause strong, audible distortion due to overloading, particularly of inputs with undersized transformers.
CMC 6 U +5 dB (No. 193001)
Microphones with an amplifier marked in this way are 5dB more sensitive than the standard version. The limiting sound pressure level is reduced by 5dB and the signal-to-noise ratio decreases slightly. The use of this version can nevertheless be advantageous if the microphone signal has to be raised above the noise level of the connected device or if rather low levels are usually recorded. Otherwise, at high sound pressure levels, it is more likely to overdrive the input of the connected device or the microphone amplifier itself.
The CMC 6 is available in different versions:
CMC 6 U:
XLR output connector
CMC 6xt U: HiRes version of the CMC 6 U (frequency response up to 40 kHz)
| Color | Grey |
|---|---|
| Conversion principle | Condenser microphone (FET) |
| Phantom power | Yes |
| Tube | No |
| Highpass | No |
| Pad | No |
| Switchable characteristic | No |
| Directional pattern | Supercardioid |
| Capsule | MK 41 (Supercardioid) |
| Number of microphones (sets) | 2 |
Product safety
Manufacturer information
SCHOEPS GMBH
Spitalstraße 20
76227 Karlsruhe (Durlach)
Germany
0721 943 20-0
Person responsible for the EU
Der Hersteller dieses Produkts befindet sich innerhalb der Europäischen Union und übernimmt die Rolle der verantwortlichen Person gemäß der EU-Produktsicherheitsverordnung. Für weitere Informationen wenden Sie sich bitte an den Hersteller.
Safety instructions
Our offer is primarily aimed at commercial users who test and use products on their own responsibility for their professional use. Please note that safety-relevant information, instructions and symbols may be included in the supplied instructions for use. This is enclosed with the product and, if available, can also be downloaded in digital form from our website.
We recommend that you read the instructions for use carefully and check the product for safety and suitability for your intended use before use. If you require further information, please contact the manufacturer or the manufacturer's EU representative directly.
Only logged in customers who have purchased this product may leave a review.
Q & A
Schoeps stereo set CMC 6 U with MK 41 | condenser microphone with supercardioid capsule
Related Products
- FET condenser microphone
- Heiserman HZ capsule
- Cinemag transformer
- NOS FETs
- Large diaphragm tube microphone (matched pair)
- Cardioid, omnidirectional, figure eight
- CK12 capsule + 6071A tube
- for voice and acoustic instruments
- Large diaphragm tube microphone
- Cardioid, omnidirectional
- M7 capsule + VF14K tube
- Popular with vocals and acoustic instruments
- Large diaphragm tube microphone
- Cardioid, omnidirectional, figure eight
- CK12 capsule + 6071A tube
- for voice and acoustic instruments
- Hypercardioid capsule black
- for STC-1 and STC-1S









































Monitor Controller


















Reviews
There are no reviews yet